 |
| ADAPPHIL |
Adapter
for screwstuds, it holds the screwstud firmly, which
eliminates the gouging of the boats or trucks with a
screwgun. It minimizes stripping in Phillips recess. |
|
 |
| KWIKFITKIT |
Tool for
precise placement on boat top or tonneau cover. |
|
 |
| TOOLAT15 |
Tool for
cutting fabric for AT15M Stud. |
|
 |
| EZTOOLAT2B |
Tool for
easily cutting fabric for AT2B. |
| EZTOOLLD |
Tool
for easily cutting fabric for Lift-the-DotŪ Socket. |
|
 |
| DIES4647HND |
Hand
setting dies, machined, knurled and plated. Sets
4647 Cap, Socket, Stud and Eyelet. |
|
 |
| TOOLAT6 |
Driver for
screwing in ATF6M, ATF6CD and ATF6CDS. |
|
 |
| TOOLAT2BH |
Hoover
Cutter for Four Prong Socket and Washer Turn
Fastener |
|
 |
| DIESPUR0SS |
Hand setting dies for stainless
steel spur grommets
|
| DIESPUR2SS |
| DIESPUR3SS |
| DIESPUR4SS |
| DIESPUR5SS |
|
 |
| LDDRIVER |
Driver for
"one-Way-Lift" Screw Studs |
|
 |
| TOOLAT10MH |
Tool for
cutting fabric for AT10M four prong stud. |
|
 |
| CUTTER
CHART FOR BUTTONS AND VENTS |
| Size |
Short cutter |
Long Cutter |
| #1
vent .565" dia. |
N/A |
CUTR1BVENT |
| #2 vent
.750" dia. |
N/A |
CUTR2BVENT |
| #22
with 1" dia. |
CUTR22SHT |
CUTR22LNG |
| #30 with
1.2" dia. |
CUTR30SHT |
CUTR30LNG |
| #36
with 1.4" dia. |
CUTR36SHT |
CUTR36LNG |
| #45 with
1.7" dia. |
CUTR45SHT |
CUTR45LNG |
|
|
|